← Blog

Tab by tab

Tab by tab: Prepress

This series goes through the editor one tab at a time and says, button by button, what each one does. After Home, Layout, View, Edit Path, Object and Text, it is the turn of the last tab, Prepress.

Prepress is for the moment a drawing leaves the screen and goes to a printer or a cutter. It adds the marks a print shop expects around the job, and a colour that prints on every plate. Everything it makes is meant for a PDF exported in CMYK, the default in JVector.

Marks

Two numbers decide where the marks go. They are in the units chosen on the Layout tab, so switch the units to mm first: 3 mm and 5 mm are the usual values.

  • Offset - how far the marks stay from the edge they mark, so they never touch the printed area.
  • Length - how long each crop mark and fold mark is.

Then:

  • Crop - adds crop marks, the short lines at the four corners that show where to cut. They are hairlines in pure black, which in a CMYK PDF means K 100 only, so they sit on the black plate alone. With objects selected, the marks go around the selection, for example a business card placed on a larger sheet. With nothing selected, they go around the page.
  • Fold - adds fold marks. First pull ruler guides to exactly where the folds go: one guide for a bifold, two for a trifold, anywhere you like for uneven panels. Then click Fold, and a dashed black tick appears outside the edge at every guide that crosses the page, or the selection. Turned guides do not count.
  • Registration - adds four registration targets, a 3 mm circle with a cross, centred outside each edge of the page. The printer uses them to line up the plates. They are drawn in the registration colour, so they appear on every plate.
  • Color bar - adds a row of five 5 mm patches below the page: cyan, magenta, yellow, black and registration. In a CMYK PDF each of the first four is one pure ink at 100 percent, which is how the printer checks the inks.

Crop and Fold keep your selection, so you can add both around the same object one after the other.

Registration color

  • Apply to selection - gives the selected objects the registration colour, in their fill, their stroke or both, whichever they already have. On screen it looks black. In a CMYK PDF it is written as 100 percent of all four inks, so it prints on every plate: right for your own marks and targets, wrong for anything else, since that much ink would flood the paper.

The bottom colour palette keeps the same five colours as the colour bar at its right end, so cyan, magenta, yellow, black and registration are always one click away.

Good to know

  • Every click adds a new group of marks, named “Print marks” in the Layers panel. You can move, hide or delete it like any other object, and Ctrl + Z takes it back.
  • The marks sit outside the page. When you export a PDF, an SVG or a PNG, JVector makes the exported area larger, so the marks come along.
  • Print on the Home tab prints the page at its exact size, so marks outside the page are left off. For a print shop, export a PDF instead.
  • In a CMYK PDF, black is K 100 and greys stay on the black plate alone. Choose RGB in the Export dialog only for files meant for screens.

That was the last tab. Together with the tools on the left, the series now covers every button in the editor.

Open the editor →